Gold Member Since 2016
Audited Supplier
Shanghai Songshan Electronics Co., Ltd.

4 AMP Radial Lead Fuse, 5 AMP Radial Lead Fuse, 6 AMP Radial Lead Fuse manufacturer / supplier in China, offering Radial Lead PPTC Resettable Fuse, Battery Strap Resettable PPTC 6V, Surface Mounted Devices 1206 Time-Lag Fuse and so on.

(/ )

Radial Lead PPTC Resettable Fuse

FOB Price: Get Latest Price
Min. Order: 1,000 Pieces
Port: Shanghai, China
Transport Package: Carton
Payment Terms: T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: LB050LVF series
  • Type: Resettable Fuse
  • Shape: Tablet
  • Trademark: songshan
  • HS Code: 85361000
  • Breaking Capacity: Low
  • Usaga: Low Voltage
  • Fusing Device: Pop-up Solid
  • Origin: Shanghai, China
Product Description
LB050LVF is a polymer resettable fuse .At a high temperature and high voltage condition, the fuse is made through a special technology after it adopts high-molecular organic polymer and conductive particle material. The fuse can reset itself and can be used repeatedly after it blows for some reasons. The performance will not decay despite the constantly repeated times. The fuse can reset for more than a thousand times and thus to a large extent, the cost is saved. In the circuit, the fuse can be used as a thermal fuse. Therefore, to some extent, it shows the performance of thermal fuse in circuit and makes the role of thermal fuse. 

  • Customized size and electrical characteristic available
  • Radial-leaded devices for wave-soldering or manually assembly
Polymer PTC Re-settable Fuse Series           
Product Dimensions For Radial-leaded Devices                                              
Unit: mm
 Radial Lead PPTC Resettable Fuse    Radial Lead PPTC Resettable Fuse

Part number
ABCDEFigures for

Thermal Derating Chart-IH(A)                                          

Part number
Hold current
Electrical Characteristics at 25ºC                                      
Part number
IHITVmaxImaxMax. Time-to-tripPd typRminR1maxFigures for
IH=Hold current: maximum current at which the device will not trip at 25ºC still air.
IT=Trip current: minimum current at which the device will always trip at 25ºC still air.
Vmax=Maximum voltage device can withstand without damage at rated current.
Imax=Maximum fault current device can withstand without damage at rated voltage.
Ttrip=Maximum time to trip at assigned current.
Pdtyp=Typical power dissipation: typical amount of power dissipated by the device when in state air environment.
Rmin=Minimum device resistance at 25ºC prior to tripping.
R1max=Maximum device resistance measured after 1 hour post one-time trip.

Part Numbering System                                                       

Product series
Hold Current
Other necessary information

Test Procedures And Requirements                                                 
TestTest ConditionsAccept/Reject Criteria
ResistanceIn still air @ 25ºCRminRRmax
Time to TripSpecified current, Vmax, 25ºCTmaximum Time to Trip
Hold Current30min, at IHNo trip
Trip Cycle LifeVmax, Imax, 100cyclesNo arcing or burning
Trip EnduranceVmax, 24hoursNo arcing or burning
Application Requirements                                                            
Soldering recommendation:
* Methods: IR, Vapor phase oven, hot air oven, wave solder, soldering temperature should not exceed GB-T2423 request.
* Devices can be cleaned using standard industry methods and solvents.
If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements.
The maximum ambient temperature shall not exceed 40ºC. Storage temperatures higher than 40ºC could result in the deformation of packaging materials. The maximum relative humidity recommended for storage is 70%. High humidity with high temperature can accelerate the oxidation of the solder plating on the termination and reduce the solderability of the components. Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use. The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present.
PPTC devices are intended for protection against occasional over-current or over-temperature fault conditions, and should not be used when repeated fault conditions are anticipated. Operation beyond maximum ratings or improper use may result in device damage and possible electrical arcing and flame.
The specification is intended to present application, product and technical data to assist the user in selecting PPTC circuit production devices. However, users should independently evaluate and test the suitability of each product. Wayon makes no warranties as to the accuracy or completeness of the information and disclaims any liability resulting from its use. Wayon's only obligations are those in the Wayon Standard Terms and Conditions of Sale and in no case will Wayon be liable for any incidental, indirect, or consequential damages arising from the sale, resale, or misuse of its products. Wayon reserves the right to change or update, without notice, any information contained in this specification.
Send your message to this supplier
Mr. James Xu
To: Mr. James Xu

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category